14:22 17 Aug 24
Issuance Request for Review Form
CDM project activity/programme of activities issuance request review form (CDM-ISSR-FORM) (Version 03.0) |
---|
Project title of the project activity or programme of activities (PoA) for which issuance is requested | Yingpeng HFC23 Decomposition Project (1947) |
---|---|
DOE that requested for issuance and date of request | TÜV NORD (13 Jun 12) |
Please indicate, in accordance with paragraphs 65 of the CDM modalities and procedures, for which reason(s) you request review | |
Incompetence | |
Please indicate reasons for the request for review | |
The methodology (AM0001, version 5, pages 5-6) requires the following with regard to the determination of w: "The historical waste generation rate w shall be estimated for the three most recent years of operation up to 2004. (...) The value of w is set at the lowest of the three historical annual values estimated (...). If insufficient data is available for the calculation of HFC23 release for all three most recent years of operation up to 2004, then the default value for w to be used is 1.5%." The PDD (page 3) states that the plant was expanded from a capacity of 3,000 tons to 25,000 tons in 2001. This would allow to use historical data for the three years 2002, 2003 and 2004 to establish w. In contrast to the information in the PDD, the project participants explain in response to CAR #1, and the DOE confirms, that the expansion was completed only end of 2002 (page 20-22 of the verufication report). If the capacity expansion was completed in 2002, the required three years of operational data to determine w are not available for the plant as registered and described in the PDD. In this case, a default value of 1.5% should be used according to the methodology. |
|
Date | 17 Aug 12 |
Offset now: visit the United Nations Carbon Offset Platform
Connect with us: