08:21 26 Nov 24
Info Report Check
Submission incomplete:
1: Editorial/Typo:
1) Page 4 of the Monitoring Report has a link missing-
"
The inclusion date of CPA01 was with the registration of the PoA on 09/11/2012 while CPA 02 and 03 were included on 28/11/2014. The project implementation details at each participating farm are delineated in Error! Not a valid bookmark self-reference..".
2) Page 12 of the MR -Monitoring equipment is systematically illustrated in Error! Not a valid bookmark self-reference..
2: The PoA-DD and CPA-DDs have provision that if project activities utilize the recovered methane for power generation, MD,y may be calculated based on the amount of monitored electricity generation, without monitoring methane flow and concentration. The DOE is requested to explain how this provision is in line with the applied methodology. Please refer to paragraphs 343 and 344 of VVS-PoA.
3: The DOE is requested to explain how it verified the following parameters:
(a) Wsite (weight of animal): (i) The sample size was calculated using formula for proportion-value parameter, whereas the parameter is a mean-value parameter; (ii) The monitoring report only describes that an annual sampling size was appropriately determined at a 90/10 precision. However, there is no information whether the actual precision has met the 10% precision. Please refer to paragraph 24 of Standard for Sampling and surveys for CDM project activities and programme of activities (version 07.0). Please also refer to appendix 4 of Guideline for Sampling and surveys for CDM project activities and programmes of activities (version 04.0) for reliability calculation.
4: The DOE is requested to address the following related to calibration:
There is no information how the DOE verified the calibration of Electric meter (serial number 151245A8) as per the paragraph 356 of VVS-PoA.
5: The DOE is requested to explain how it verified the determination of the following as per the applied methodology or applicable tool:
(a) The project emission from flaring, particularly the application of default value of flare efficiency is 50%. As per the tool Tool to determine project emissions from flaring gases containing Methane, default value of 50% is used in hour h if the flare is detected for more than 20 minutes during the hour h. However, there is no information how the DOE verified the correct application for default value of flare efficiency.
1: Editorial/Typo:
1) Page 4 of the Monitoring Report has a link missing-
"
The inclusion date of CPA01 was with the registration of the PoA on 09/11/2012 while CPA 02 and 03 were included on 28/11/2014. The project implementation details at each participating farm are delineated in Error! Not a valid bookmark self-reference..".
2) Page 12 of the MR -Monitoring equipment is systematically illustrated in Error! Not a valid bookmark self-reference..
2: The PoA-DD and CPA-DDs have provision that if project activities utilize the recovered methane for power generation, MD,y may be calculated based on the amount of monitored electricity generation, without monitoring methane flow and concentration. The DOE is requested to explain how this provision is in line with the applied methodology. Please refer to paragraphs 343 and 344 of VVS-PoA.
3: The DOE is requested to explain how it verified the following parameters:
(a) Wsite (weight of animal): (i) The sample size was calculated using formula for proportion-value parameter, whereas the parameter is a mean-value parameter; (ii) The monitoring report only describes that an annual sampling size was appropriately determined at a 90/10 precision. However, there is no information whether the actual precision has met the 10% precision. Please refer to paragraph 24 of Standard for Sampling and surveys for CDM project activities and programme of activities (version 07.0). Please also refer to appendix 4 of Guideline for Sampling and surveys for CDM project activities and programmes of activities (version 04.0) for reliability calculation.
4: The DOE is requested to address the following related to calibration:
There is no information how the DOE verified the calibration of Electric meter (serial number 151245A8) as per the paragraph 356 of VVS-PoA.
5: The DOE is requested to explain how it verified the determination of the following as per the applied methodology or applicable tool:
(a) The project emission from flaring, particularly the application of default value of flare efficiency is 50%. As per the tool Tool to determine project emissions from flaring gases containing Methane, default value of 50% is used in hour h if the flare is detected for more than 20 minutes during the hour h. However, there is no information how the DOE verified the correct application for default value of flare efficiency.
Offset now: visit the United Nations Carbon Offset Platform
Connect with us: