17:16 30 Aug 26
Info Report Check
Submission incomplete:
1: Scope: The verification report does not provide an assessment that all physical features of the proposed CDM project activity proposed in the registered PDD are in place and/or that the project participant has implemented and operated the proposed CDM project activity as per the registered PDD or the approved revised PDD. (VVM v.1.2 para 196)
Issue: The PDD (page 6) states that the Dindigul plant is located in the coordinates: Latitude:10º 42’ 35” N & Longtitute: 78º 5’ 42” E while the monitoring report (page 3) states that the plant is located in Latitude: 10º 17’ 33.97” N & Longitude: 77º 52’ 6.60” E. Further, regarding the Pattukottai plant, the PDD states that it is located at 10.43° N 79.32° E while the monitoring report states it is located at Latitude: 10º 24’ 10.48” N & Longitude: 79º 15’ 06.89” E. However, the DOE makes no reference to the difference in the location coordinates for the two plants.
2: Scope: The verification report does not provide an assessment of the compliance with EB 52 Annex 60 'Guidelines for assessing compliance with the calibration frequency requirements' for the calibration delay. (VVM v.1.2 para 184 (a) (ii) & EB 52 Annex 60)
Issue: The DOE states that the meter with serial number 06767466 was on line till 24 July 2008 and it was replaced by meter with serial number APM99616. The DOE states that the meter with serial number 06767466 (main meter) was calibrated on 20 November 2006 but provides no further calibration information for this meter. However, as per EB52 Annex 60 (“Guidelines For Assessing Compliance With The Calibration Frequency Requirement”) the PP shall apply “the maximum permissible error of the instrument to the measured values, if the results of the delayed calibration do not show any errors in the measuring equipment, or if the error is smaller than the maximum permissible error”, thus, the PP/DOE shall provide the value of the delayed calibration of meter with serial number 06767466 in order to apply the maximum inaccuracy class of the meter.
1: Scope: The verification report does not provide an assessment that all physical features of the proposed CDM project activity proposed in the registered PDD are in place and/or that the project participant has implemented and operated the proposed CDM project activity as per the registered PDD or the approved revised PDD. (VVM v.1.2 para 196)
Issue: The PDD (page 6) states that the Dindigul plant is located in the coordinates: Latitude:10º 42’ 35” N & Longtitute: 78º 5’ 42” E while the monitoring report (page 3) states that the plant is located in Latitude: 10º 17’ 33.97” N & Longitude: 77º 52’ 6.60” E. Further, regarding the Pattukottai plant, the PDD states that it is located at 10.43° N 79.32° E while the monitoring report states it is located at Latitude: 10º 24’ 10.48” N & Longitude: 79º 15’ 06.89” E. However, the DOE makes no reference to the difference in the location coordinates for the two plants.
2: Scope: The verification report does not provide an assessment of the compliance with EB 52 Annex 60 'Guidelines for assessing compliance with the calibration frequency requirements' for the calibration delay. (VVM v.1.2 para 184 (a) (ii) & EB 52 Annex 60)
Issue: The DOE states that the meter with serial number 06767466 was on line till 24 July 2008 and it was replaced by meter with serial number APM99616. The DOE states that the meter with serial number 06767466 (main meter) was calibrated on 20 November 2006 but provides no further calibration information for this meter. However, as per EB52 Annex 60 (“Guidelines For Assessing Compliance With The Calibration Frequency Requirement”) the PP shall apply “the maximum permissible error of the instrument to the measured values, if the results of the delayed calibration do not show any errors in the measuring equipment, or if the error is smaller than the maximum permissible error”, thus, the PP/DOE shall provide the value of the delayed calibration of meter with serial number 06767466 in order to apply the maximum inaccuracy class of the meter.
Offset now: visit the United Nations Carbon Offset Platform
Connect with us: